Changing a headlight is a breeze. First you'll need to determine if you have a sealed beam (which means the entire light fixture comes off and is replaced, usually on models older than 1990) or a Halogen (meaning just the bulb is replaced) All You'll need a simple screwdriver.
Sealed Beam: You'll start by removing the three or four screws holding the light in, pull the light out and disconnect the wire plug. Attach the wiring plug to the new light. Secure the light with the screws and you're finished.
Halogen lights are even more simple. Pop your hood with the latch release in your car, usually just inside the drivers door. Open your hood to look at your engine. Behind the headlight housing, pull off the plug yank out the bulb and replace with new and reconnect the plug.
Good Luck!!
Please feel free to email me with any questions: Emilyrex08@Yahoo.com
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment